| HYTAC® W was CMT’s first commercially-produced epoxy syntactic foam. With low thermal conductivity and CTLE associated with the syntactic structure, it proved to the thermoforming industry that felt-covered wood plugs could be resigned to the dustbin of history. While still used in low-volume or low-cost applications, W has been supplanted by other, superior levels of HYTAC® materials. Low thermal conductivity and specific heat This translates to lower heat transfer reducing warm-up time and virtually eliminating material sticking to the plug. Dimensionally stable The low coefficient of thermal expansion means the plug maintains its shape over a wide temperature range. |
HYTAC® Direct StoreResources:
|
HYTAC® W Standard Sizing
| Rod Material | Sheet Material | Board Material |
 |
 |
 |
| 2.0″ D x 24″ L (51mm D x 610 L) | 1.0″ x 24 x 26 (25mm x 610 x 660) | 1.0″ x 24 x 60 (25mm x 610 x 1524) |
| 2.5″ D x 24″ L (64mm D x 610 L) | 1.5″ x 24 x 26 (38mm x 610 x 660) | 1.5″ x 24 x 60 (38mm x 610 x 1524) |
| 3.0″ D x 24″ L (76mm D x 610 L) | 2.0″ x 24 x 26 (51mm x 610 x 660) | 2.0″ x 24 x 60 (51mm x 610 x 1524) |
| 3.5″ D x 24″ L (89mm D x 610 L) | 2.5″ x 24 x 26 (64mm x 610 x 660) | 2.5″ x 24 x 60 (64mm x 610 x 1524) |
| 4.0″ D x 24″ L (102mm D x 610 L) | 3.0″ x 24 x 26 (76mm x 610 x 660) | 3.0″ x 24 x 60 (76mm x 610 x 1524) |
| 4.5″ D x 24″ L (114mm D x 610 L) | 3.5″ x 24 x 26 (89mm x 610 x 660) | 4.0″ x 24 x 60 (102mm x 610 x 1524) |
| 5.0″ D x 24″ L (127mm D x 610 L) | 4.0″ x 24 x 26 (102mm x 610 x 660) | 5.0″ x 24 x 60 (127mm x 610 x 1524) |
| 5.5″ D x 24″ L (140mm D x 610 L) | 4.5″ x 24 x 26 (114mm x 610 x 660) | 6.0″ x 24 x 60 (152mm x 610 x 1524) |
| 6.0″ D x 24″ L (152mm D x 610 L) | 6.0″ x 24 x 26 (152mm x 610 x 660) | |
| 7.0″ D x 24″ L (178mm D x 610 L) | ||
| 8.0″ D x 24″ L (203mm D x 610 L) | ||
| 8.0″ D x 12″ L (203mm D x 305 L) | ||
| 9.0″ D x 12″ L (229mm D x 305 L) | ||
| 10.0″ D x 12″ L (254mm D x 305 L) | ||
| 12.0″ D x 12″ L (305mm D x 305 L) |